The bottom-bar 'Wrap: On/Off' toggle flipped State.WordWrap and relabelled
itself, but the render path never read the flag: NewTextField hardcoded
WordWrap: true and drawWrappedText always shaped at the region width with
WrapHeuristically, so lines wrapped in both modes.
NewTextField now takes the wordWrap flag, TextField.Draw passes tf.WordWrap
to drawWrappedText, and with wrap disabled the shaper gets unlimited width
(MaxWidth = maxInt32, as in single-line layout) so over-long lines extend
past the region and are clipped instead of wrapping. EditorLayout passes
its existing wordWrap parameter through.
Selection handles now track the finger 1:1 (anchor grab point + displacement)
instead of snapping by whole lines, and crossing the opposite handle flips
the selection (native behaviour) instead of clearing it.
Caret and tap/handle line resolution use VisualLineStarts instead of the
min-Y baseline: the window's first visual line may be an empty line with no
recorded glyphs, which used to draw boundary carets one line too low per
leading empty line and land taps/dragged handles one line below the finger.
New exported ui.CaretPoint centralises byte->insertion-point mapping.
The off-screen caret no longer clamps to the window edge: EditorLayout ships
the true (possibly negative / past-end) window-relative cursor and the
renderer skips the caret when the cursor is outside the shaped window, so
scrolling past the caret no longer makes it jump onto the top/bottom line.
IME/router replay fixes: key.FocusCmd is issued only on a focus transition
(a per-frame no-op still takes the immediate-command path and re-queues all
pointer events), and the key.SelectionCmd IME sync is deferred while a
handle drag is in progress (each push re-injected the drag into every
gesture). Handle drags forward only Grabbed events; a tap inside a handle
grab box is a no-op.
Also: key.FocusEvent no longer logs as unexpected in main; dead code removed
(worker taskWrapper, browser applyXxxResult stubs, scrollIndex, mock_setup
sortModeKey/lineSpan helpers); mock FileSystem.ListPaths prefix match uses
strings.HasPrefix; build scripts run the new scripts/check.sh static gate
(go vet + staticcheck). Tests: caret_point_test, touch_selection updates
(flip/empty-line cases), off-window caret e2e, selection drag e2e grab step.
Two user-reported bugs in the post-wrap build:
1. Selection 'jumped' when scrolling: frameOf's chunked branch shadowed the
outer start/end with 'start, end, winLine := cb.VisibleByteRange(...)',
leaving IMEWindowStartByte at 0 for chunked files while scrolled, so the
window-relative selection highlight (and IME commits) mis-mapped near the
file top. Fix: declare winLine outside, assign. Mutation-verified
regression tests: real_file_scroll_selection_test.go.
2. Bottom bar hidden behind the keyboard: GioView extends SurfaceView, which
unconditionally marks the window FORMAT_TRANSLUCENT; translucent windows
are never IME-resized, so adjustResize is dead. Fix (build scripts):
smali-patch a PadInsetsListener OnApplyWindowInsetsListener onto the
GioView (shrinks it by the IME inset bottom) + setDecorFitsSystemWindows
(false) on API 30+ so insets are dispatched. targetSdk kept at 34.
3. (Found while fixing 2) Keyboard could not be dismissed: TextField.Draw
issued SoftKeyboardCmd{Show:true} every frame; with insets-driven
resizes, the hide animation triggered redraws that re-showed the keyboard
mid-animation. Fix: ShowIMESeq pulse from the logic layer (open/tap/
double-tap); renderer shows only on pulse change, re-arming on focus
loss — matching widget.Editor.
On-device (emulator): BACK dismisses and stays down; tap re-shows; typing
works; bottom bar above keyboard; word selection anchored across flick
scroll. go test -race ./... green. Phone APK rebuilt with the same patch.
Implement the Android-native touch selection model, verified on-device:
- long-press selects the word under the finger (blank -> caret + paste-only
menu); double-tap selects the word; drag handles resize the selection,
drag the highlighted body to move it; floating menu offers copy/cut/paste
(selection) or paste (bare caret), closing on any item tap.
- Renderer reports finger positions (app-local Dp) as tap/double-tap/
long-press/selection-drag events; the logic goroutine owns all geometry
(EditorRegion, menu rect, hit-testing, handles) and the renderer only
draws the frame snapshot.
- Long press: 400 ms still-press on the editor, cancelled by movement
(non-grabbing raw pointer probe) or by a scroll/handle grab. The main
loop keeps invalidating while a press is pending (Gio renders on demand;
a stationary finger produces no frames).
- Clipboard crosses the goroutine boundary via buffered channels
(clipboardSetChan/pasteReqChan logic->main, pasteChan main->logic);
main executes the Gio ops and, on Android, invalidates after ReadCmd
because a queued transfer.DataEvent schedules no frame of its own.
Renderer fixes found while validating on-device:
- clickReg was stored by value in a map; range yielded copies so per-frame
press bookkeeping (long-press state) was silently discarded. Now pointers.
- On Android a tap's press+release arrive in the same frame and
gesture.Click/Drag return one event per Update call; without draining
each gesture's queue every frame the release was lost on an idle window
and every menu tap was swallowed (needed a second tap to 'rescue' it).
Click and drag loops now drain to exhaustion (scroll already does).
- pointer.Filter queries must name Kinds: a zero-kinds filter matches
nothing (the press-probe query was dead).
- Menu.Draw offsets items by the menu origin; the clippable drawElement
branch registers SelDrag (handles now draw for the TextField).
Tests: internal/editor/touch_selection_test.go (word range, long-press,
double-tap, tap/menu guards, handle drags, menu actions, selection edits)
and internal/test/e2e/touch_selection_e2e_test.go; full suite green under
-race. Docs: spec.md §2.2 + §7, architecture.md §6.3a, development_plan.md
Phases 8-9.
Selection: shift+arrow extends a selection (absolute byte offsets,
anchor/caret model); insert/backspace/delete replace the selection; the
IME unions its reported range with the active selection; the highlight
is drawn in the TextField and the selection is pushed to the IME.
Android key input (the blocker found during on-device validation):
Gio v0.10 on Android (a) drops modifier state in the JNI bridge and
(b) wraps plain arrow-key presses in input.SystemEvent for focus
navigation, so arrow keys never reached the editor. main.go now
registers explicit named key.Filters for the four arrows (delivers the
press and suppresses the focus jump) and tracks the shift key itself.
Verified on the emulator: plain arrows move the caret, shift+arrow
shows a highlight, typing replaces the selection.
Real-file e2e tests (real on-disk files via the real FileSystem,
multi-chunk 256KB files, chunk-boundary and multi-byte edits) found
and fixed two real bugs:
1. Line index: UpdateLineIndexAfterEdit only shifted offsets; edits
involving newlines left it permanently inconsistent. Replaced with
newline-aware UpdateLineIndexAfterInsert/UpdateLineIndexAfterDelete.
2. Rune granularity: HandleBackspace/HandleDelete deleted one byte,
corrupting multi-byte UTF-8 characters (e.g. a 2-byte char
straddling a chunk boundary). Now rune-granular.
Also: airtight e2e harness load-wait (StatFile/ReadFile/BuildLineIndex
interleaving could satisfy the old condition early).
Full suite green under -race; on-device verified.
TextField.Draw re-pushed key.SnippetCmd and key.SelectionCmd every frame
while focused. Re-pushing an unchanged snippet resets the IME's composition
and caret, so commits arriving faster than a frame interleaved with those
resets and desynced the cursor (garbled/duplicated text).
Mirror widget.Editor's updateSnippet/selection gating: track the last-pushed
snippet and caret in the main-owned Renderer (keyed by field ID, reset on
focus (re)gain), and only emit the ops when they actually change. A fresh
push is forced whenever the field (re)gains focus so the IME always starts
from a known state. Also drop a leftover per-frame 'Focused:' debug print.
On-device: rapid back-to-back commits (0.08-0.1s cadence, faster than a
frame) now land cleanly - type HELLO, append+backspace, and a
browser->editor navigation round-trip all produce exact content.
go test -race ./... green.
Finish Phase 1 items 1, 2, 4, on top of the range-handling done in 9b78219:
- TextField.Draw now emits, when focused:
* key.InputHintOp{HintText} (item 4: enable text keyboard/autocorrect)
* key.SnippetCmd (the visible window as the snippet, Range {0,len})
(item 2: swipe/autocorrect source)
* key.SelectionCmd (caret, window-relative rune index)
(item 1: IME selection sync)
The snippet is the visible window (not the whole file), so the IME treats
the window as the document and reports EditEvent.Range window-relative.
- HandleReplaceRange now resolves the window-relative range against
IMEWindowText and offsets by IMEWindowStartByte to address the buffer
(string and chunked paths). Falls back to the whole buffer when layout
has not set the window (tests).
- EditorState gains IMEWindowStartByte / IMEWindowText, set during layout.
- Add runeCount helper (utf8 leading-byte scan) in the ui package.
- Fix a data race in three editor e2e/integration tests: they called
OpenFile from the test goroutine while the logic goroutine ran layout;
now wrapped in withState so the state write happens on the owner.
Tests: ime_range_test.go gains windowed-path coverage (string+chunked).
go build, go test, go vet, and go test -race are all green.
Frame now carries view state (scale/focus/query) to the main goroutine,
which reads only the frame-receiver-stored snapshot. Renderer owns Gio
widget editors (registered by ID) and the draw scale. Autosave timer
sends a token to the logic goroutine instead of touching state;
Shutdown waits for the owner to exit before FlushAll.
Tests access state only through owner-side Inspect/WithState helpers
(harness + in-package). Fixed double-Harness.Run race in two e2e tests,
made TestWorkerPool_PriorityPreemption deterministic, and raised the
lazy-loading test timeout that was too short under -race.
go test -race ./... is now green.
- JNI: open_file_in_termux via ACTION_SEND intent (text/plain + file:// uri),
global context ref kept from registerFragment
- impl_android.go: OpenFile(path) attaches current thread if needed
- NewLogic takes openfunc; State.open + ui.OpenFile now func(string)
- ChunkedBuffer.VisibleByteRange: word-wrap path using
GlyphLayout.VisualLineStarts (+byteOffset, lineHeight, visual index param)
- GlyphLayout gains LineHeight; drawWrappedText records VisualLineStarts
- WordWrap default true; State.ByteOffset tracks first visible line
- types: VisualLineIndex
- scroll_fix_test.go (new)
- debug prints left in place (WIP; cleanup in later phase)
- Add WriteFile method to mock filesystem (non-atomic path, creates files)
- Implement WriteFileAtomic in mock with temp file + rename pattern
using .tmp/ directory, matching real filesystem semantics
- Update WriteFileTask.Execute() to use WriteFileAtomic
- Update FlushAll() to use WriteFileAtomic
- Fix mock to create files on write (matching os.WriteFile behavior)
- Update tests to match new semantics (create-if-not-exists)
- Fix cursor vertical alignment and ensure it respects ScrollOffset.
- Fix scrolling in editor page by correctly registering scroll interactions in the renderer.
- Ensure cursor is clipped to the editor text area to prevent drawing over status bars.
- Replace gtx.Event(nil) with key.Filter{Focus: focusedID} and
key.FocusFilter{Target: focusedID} so Gio correctly routes key
and edit events to the focused editor text field.
- Convert EditorState.CursorPosition (byte offset) to line/column
coordinates for accurate cursor rendering.
- Add debug logging in HandleKeyDown and HandleCursorMove.
- Remove currentBrowserState global and SetBrowserState from browser package
- Browser now receives sortHandler as a parameter instead of using global state
- Fix sort mode toggle: reload pages after clearing cache (was showing 'Loading...')
- Add String() methods to all UI element types for debugging
- Add e2e tests for sort mode functionality (5 tests)
The editor now owns all state; the browser is a pure function receiving
state and handlers through parameters.
- Changed BrowserScrollOffset and ListView.ScrollOffset from int (row index)
to ui.Dp (pixel offset) for smooth per-pixel scrolling
- Updated HandleBrowserScroll to use raw Dp delta instead of row-based
scrolling with minimum ±1 row jumps
- Fixed search not triggering new frames by detecting query changes in
main.go FrameEvent handler
- Fixed click misalignment by indexing RowFilenames with local index i
instead of rowGlobalIndex
- Fixed bottom clamping using actual BrowserListHeight and corrected
formula: maxScroll = totalRows * rowHeight - BrowserListHeight
- Add clippableElement interface for elements that need their own clip region
- ListView implements NeedsClip() so drawElement pushes a clip before Draw
- RegisterScroll no longer has its own clip; relies on element clip context
- Aligns with Gio's clip-based gesture registration model
- Fix scroll events firing outside the visible list area on browser page
Also:
- Update touch.md documentation to reflect clip-based interaction model
- Remove debug logging from ListView.Draw
- Remove TODO-click-fixes.md (all items resolved)
- Added Page state (BrowserPage/EditorPage) and SortMode
- BrowserLayout with 30 static entries, sort toggle, search placeholder
- ListView rows clickable via per-row RegisterClick
- Scroll gesture registered at START of ListView.Draw (before clicks)
so click gestures registered later are checked first during hit test
- Unique IDs for interactive elements: editor_text, browser_list, search_bar
- ListView.Interactions() filters out Scroll (registered in Draw, not registerInteraction)
- RegisterScroll added to Renderer, called from element Draw methods
- lastLineYChan frame loop fixed: only re-layout if value changed
- Back icon added, editor status bar shows active filename
- Renderer computes word wrap via single LayoutString pass with
WrapHeuristically policy; glyphs drawn inline at FlagLineBreak
- Fixed line height (fontSize * 1.2), independent of glyph metrics
- Two-finger trackpad scroll via gesture.Scroll with vertical axis
- Display line feedback: renderer reports last glyph Y after each
Draw; logic uses it to clamp scroll offset so last line stops
at bottom of viewport with lineHeight/2 padding
- ScrollRange fix: {Min: -(1<<30), Max: 1<<30} ensures scroll
delta is consumed (empty range consumes nothing via clampSplit)
- Line counting fix: only FlagLineBreak increments count; buffer
flushes (32-glyph cap) draw but don't count
- Fix render.go: replace broken material.Label with shaper-based text
rendering (LayoutString + Shape + glyph iteration) per Gio's paintGlyph
- Fix render.go: only apply clip rects at container boundaries; leaf
elements have zero-size regions that were clipping all text out
- Fix render.go: call r.drawElement recursively for container children
so nested containers work and clips are applied correctly
- Fix render.go: add drawLineText/drawLine helpers matching Gio's
paintGlyph offset calculation (x + first.X, y + first.Y)
- Fix element.go: Button.Draw now uses r.drawText instead of duplicate
broken material.Label code; Label defaults to black when color is unset
- Fix state.go: container children use relative coordinates instead of
mixed screen-space/container-relative positions
- Fix main.go: ConfigEvent carries raw pixel dimensions only; ScaleEvent
carries scale only; layout is computed once per frame using both,
eliminating the infinite Invalidate() loop
- Add Draw(gtx, r *Renderer) to Element interface
- Add Container type that implements Element and holds []Element children
- Leaf types (Label, Icon, Button) implement Draw themselves
- Single recursive drawElement function in Renderer — no switch/case
- Remove StatusBar/BottomBar — replaced by Container
- Remove shaper.go — no longer needed with Gio material labels
- Simplify main.go — scale via ScaleProvider interface
- 5 files changed, shaper.go deleted
- New shaper.go: ShapeText() returns ShapedText with measured width +
stored PathSpec + BitmapsCall, DrawShapedText() draws with zero shaper calls
- drawStatusBar: ShapeText for filename + right icons, positions from widths
- drawBottomBar: ShapeText for cursor/bytepos/wrap, positions by alignment
- No separate measureText helper: ShapeText.Width provides measurements
- StatusBar uses IconLeft/IconRow string slices for icon configuration
- BottomBar uses BarAlignment enum for item positioning
- Add ui.Dp and ui.Px as distinct named types
- Logic layer works exclusively in Dp (positions, sizes, regions)
- Renderer converts Dp→Px at Gio interop boundaries
- Capture gtx.Constraints once at start of Draw() for consistent positioning
- main.go converts app.ConfigEvent pixels to Dp before passing to logic layer
- Update documentation with new coordinate system architecture
Elements implemented:
- StatusBar (top bar with filename, action icons, conflict/search icons)
- BottomBar (bottom bar with cursor position, byte position, word wrap button)
- Button (interactive button element)
- AlphaIndex, SearchBar, Cursor, MergeHunk, Toast, Spacer (stubs)
Layout:
- EditorLayout function computes regions for StatusBar and BottomBar
- Filename truncation with ellipsis (mocked filename for testing)
- Mocked data: "very_long_filename...", "Ln 47, Col 12", "1024 / 50000"
Renderer:
- drawStatusBar: draws filename line + icon line
- drawBottomBar: draws cursor pos, byte pos, word wrap button
- drawButton: draws button text
- drawIconButton: draws icon buttons
Window resize:
- configChan setup in main.go
- ConfigEvent handling in event loop
- Layout recomputation on resize
Builds and runs successfully.
Co-authored-by: Qwen-Coder <qwen-coder@alibabacloud.com>
- Element interface with Region() and Visible() methods
- Label and ListView element types with constructors
- Renderer that clips and draws elements in slice order
- Main app loop with Gioui window and frame events
Co-authored-by: Qwen-Coder <qwen-coder@alibabacloud.com>
